Calculated Results
Allowable Stresses
| Parameter |
Value |
Unit |
| Allow bearing stress, sb |
211.5 |
MPa |
| Allow shear stress, ta |
94 |
MPa |
| Allow tensile stress, st |
141 |
MPa |
| Allow bending stress, sbend |
141 |
MPa |
| Allow welding stress, sw |
144 |
MPa |
Design Force
| Parameter |
Value |
Unit |
| Design force on stopper, Fd = FT * SF |
18.49621 |
MT |
Strength Checks
Axial Strength Check
| Distance of axial strength, d = R - A/2 |
84.1 |
mm |
| Section area of axial strength, AX = 2 * d * B |
8545.56 |
mm² |
| Axial stress on delta plate, sX = Fd/AX |
21.22 |
MPa |
| Status |
OK |
Shear Strength Check
| Distance of shear strength, d = R - A/2 |
84.1 |
mm |
| Section area of shear strength, AS = 2 * d * B |
8545.56 |
mm² |
| Shear stress on delta plate, sS = Fd/AS |
21.22 |
MPa |
| Status |
OK |
Bearing Strength Check
| Arc length for bearing strength, s = π * A/4 |
27.49 |
mm |
| Section area for bearing strength, AB = s * B |
1396.49 |
mm² |
| Bearing stress on delta plate, sS = Fd/AB |
129.88 |
MPa |
| Status |
OK |
